Your Cart is Empty.

Video Ground Loop Isolator (15-GL01) noise and flickering filter


Video Ground Loop Isolator - noise and flickering filter (15-GL01) (409194)

The COP Security / COP-USA GL01 video ground loop isolator is a passive device which can reduce ground loop interference with cctv signals and can easily be installed or added to a new or existing system.

The GL01 is very useful where a video signal is transmitted via cable between points with different ground potentials. Differences in ground potentials are typically caused by unbalanced power line loads.

15-GL01 Features

* BNC male to BNC female with mini cable 15 on both sides.
* Passive, no power required.
* Prevents video-signal distortion caused by video ground loops.
* Eliminates picture tearing, cross talk, and rolling.
* Prevents power cables laid by others interfering with the cctv system.
* Built in TVS (Transient Voltage Suppressors) for surge protection.

15-GL01 Specifications:
* Item No: 15-GL01
* Insertion Loss: 0.5dB
* Frequency Response: 0-3dB at 10Mhz
* Input Resistance: 75 ohm
* Output Resistance: 75 ohm
* Isolation Voltage: 600 VDC (min)
* Insulation Resistance: 100 m Ohm
* Transient Voltage Suppressors: 12 Vrms
* Continuity 0
* Dimensions: (WxHxD) (mm): 84x28x21 with 15cm x 2 cable
* Material: ABS Black

Sold Out
  • Model: 40-9194
  • Manufactured by: COP